Price every trip from your own rules and turn quotes into paid bookings.
Transportation quote software is the system a ground transportation operator uses to turn a trip request (pickup, drop-off, time, vehicle, passengers) into an accurate price automatically, using the operator's own rates, fees, and minimums. For limo, taxi, shuttle, and tour companies, it replaces the calculator, the rate sheet taped to the monitor, and the "let me get back to you" email.
This page covers what transportation quote software has to handle, how to turn your pricing into rules the software can apply, three worked quotes across different verticals, a buyer's checklist, and how quoting works in Ride Sync.
What transportation quote software needs to do
Good transportation quote software prices any trip you sell from rules you set once, shows the customer that price immediately, and lets them book and pay from the same quote. If any of those three steps needs a person, the software is only a faster calculator.
- Rate rules by service type, Why it matters: Hourly, point-to-point, and flat-rate trips price differently; In Ride Sync: Instant quoting with rate rules
- Vehicle-specific pricing, Why it matters: A sedan, SUV, and 14-passenger van cost different amounts to run; In Ride Sync: Rate rules you set for each vehicle you run
- Default fees added automatically, Why it matters: Gratuity and cleaning fees get forgotten on manual quotes; In Ride Sync: Custom default fees
- Customer-facing quote, Why it matters: Customers compare prices quickly and book the first clear answer; In Ride Sync: Online booking and quote widget on your website
- Quote to booking in one step, Why it matters: Every re-entry is a chance to lose the customer or make an error; In Ride Sync: Instant booking with pay to confirm
- Payment on the quote, Why it matters: A quote without payment is a maybe; In Ride Sync: Card, Apple Pay, and Google Pay through your own Stripe account
- One system for every vertical, Why it matters: Mixed fleets should not need two pricing tools; In Ride Sync: Taxi, limo, and tour on one board
Turn your pricing into rules before you buy anything
The software can only quote as well as the rules you give it, so write your pricing down as rules first. Most operators already price by rules; they just live in someone's head.
Answer these questions for each service you sell:
- What is the pricing basis? Hourly, distance (base plus per mile), flat rate by zone or route, or per seat.
- What is the minimum? A minimum number of hours or a minimum fare.
- What changes by vehicle? Usually the hourly rate or the per-mile rate.
- Which fees always apply? Gratuity, fuel surcharge, cleaning, airport fees.
- Which surcharges apply sometimes? Late night, holidays, peak dates.
- What gets charged after the ride? Tolls, wait time, overtime, damage.
If you have never built the base rate from your costs, start with the cost-per-hour method in how much to charge for a limo per hour. It works for vans and cabs too.
Worked example 1: an hourly limo quote
An hourly quote is rate times hours, with a minimum and default fees on top. Every number below is an assumption for illustration, not a market rate.
Assumptions: stretch limo at $150 per hour, 3-hour minimum, 20% default gratuity, $25 fuel surcharge. Customer requests a 4-hour anniversary dinner run.
- Base: 4 hours x $150 = $600
- Gratuity: 20% x $600 = $120
- Fuel surcharge: $25
- Quote: $745
A manual quote here often misses either the gratuity or the surcharge. A rule-based quote never does, because both are attached to the service, not to the person typing.
Worked example 2: a point-to-point taxi or sedan quote
A distance quote is a base fare plus a per-mile rate, checked against a minimum fare. Again, these are labeled assumptions.
Assumptions: base fare $8, $3.20 per mile, $25 minimum fare, late-night surcharge of $10 between midnight and 5 a.m. Customer requests an 11-mile ride at 1:15 a.m.
- Base: $8
- Distance: 11 x $3.20 = $35.20
- Subtotal: $43.20 (above the $25 minimum, so the minimum does not apply)
- Late-night surcharge: $10
- Quote: $53.20
If the same customer had requested a 4-mile ride, the subtotal would be $20.80, and the $25 minimum fare would apply instead before the surcharge.
Worked example 3: a flat-rate shuttle or tour quote
A flat-rate quote uses a fixed price per route or zone, adjusted by vehicle size. These numbers are assumptions too.
Assumptions: hotel-to-stadium route, $220 flat for a 14-passenger van, $340 flat for a 24-passenger minibus, $30 cleaning fee on event trips. A group of 18 requests a game-day run.
- Vehicle: 18 passengers needs the minibus, $340
- Cleaning fee: $30
- Quote: $370
The same rule structure works for a fixed-price city tour: route, vehicle, flat price, default fees. The point is that one tool handles all three pricing bases instead of three different spreadsheets.
Quote speed decides who gets the booking
The fastest accurate quote usually wins, because customers book the first operator who gives a clear price they can act on. That is the whole case for software over manual quoting, and it is covered in detail in how to stop losing bookings to slow quotes.
Here is a quick self-check. If two or more of these are true, manual quoting is costing you bookings:
- [ ] Website inquiries wait more than an hour for a price
- [ ] Two people in your office would quote the same trip differently
- [ ] Gratuity or fees are sometimes left off a quote
- [ ] Customers accept a quote, then you re-enter it as a reservation
- [ ] You chase customers for a deposit after they say yes
- [ ] Quotes stop when the office closes
Buyer's checklist for transportation quote software
Choose quote software by whether it can price your real trips without workarounds, then by how few steps sit between quote and paid booking. Run these tests during any free trial, using real trips from last month.
- Quote your five most common trips, What a pass looks like: Every price matches what you would have charged
- Quote an hourly trip below the minimum, What a pass looks like: The minimum applies automatically
- Quote a trip that triggers a surcharge, What a pass looks like: The surcharge appears without manual edits
- Request a quote from your own website on your phone, What a pass looks like: Price appears instantly, no email step
- Accept and pay for that quote, What a pass looks like: Booking lands on the board, paid, with confirmation sent
- Add a toll after the trip, What a pass looks like: You can charge it without calling the customer for a card
- Quote a taxi, a limo, and a tour trip, What a pass looks like: All three work in one system
For the human side of quoting, such as what to ask on the phone and how to handle custom requests, see how to quote a limo job.
How quoting works in Ride Sync
In Ride Sync, you set rate rules once and every quote, whether from your office or your website, is priced by them. The flow looks like this:
- Set rate rules. Hourly rates, minimums, base fare and per-mile pricing, flat rates, and surcharges for the services and vehicles you sell.
- Add custom default fees. Gratuity, cleaning, or other fees you always charge are added to quotes automatically.
- Embed the booking and quote widget. Customers enter trip details on your website and see an instant price.
- Turn on instant booking. Customers pay to confirm with card, Apple Pay, or Google Pay through your own Stripe account, connected in one click.
- The trip lands on your dispatch board. The scheduling assistant highlights a driver who is already booked at that time so you can assign someone free.
- Customers get SMS and email confirmations and a reservation reminder before pickup.
- After the ride, charge tolls, wait time, overtime, or damage to the card saved at booking, and send an invoice from the reservation.
Repeat customers can quote and rebook from a customer web account with their saved payment method, which makes the second booking even faster than the first.
Frequently asked questions
What is transportation quote software?
It is software that automatically prices ground transportation trips from an operator's own rate rules, fees, and minimums, and shows that price to staff or customers instantly.
Can one quote tool handle limo, taxi, shuttle, and tour pricing?
Yes, if it supports multiple pricing bases. Ride Sync quotes hourly, point-to-point, and flat-rate trips from rate rules and runs taxi, limo, and tour work on one board.
Do customers see the quote on my website?
In Ride Sync, yes. The booking and quote widget on your website shows an instant price, and with instant booking turned on, customers can pay to confirm right away.
Will quote software add gratuity and fees automatically?
Ride Sync adds custom default fees, such as gratuity or cleaning, to quotes automatically, so they are not left off by accident.
Can I try transportation quote software before paying?
Ride Sync has a 14-day free trial with no card required, so you can test your real trips and rates first.
Quick recap
Transportation quote software prices every trip from rules you set once, shows customers the price instantly, and lets them book and pay from the quote. Write your pricing down as rules first, test the software with real trips from last month, and look for quote, payment, and dispatch in one place. Ride Sync does that with rate rules, default fees, a website quote widget, pay-to-confirm booking, and one board for taxi, limo, and tour.
Start a free trial of Ride Sync (14 days, no card required).

