Find the real cost of every paid mile before you set a fare.
Taxi cost per mile is the total cost of running a cab, including the vehicle, insurance, fuel, maintenance, driver pay, and overhead, divided by the miles it drives. It is the number your per-mile fare has to beat, and the number most small fleets have never actually worked out.
Search for this term and you mostly find what riders pay, or regulator reports on fare reviews. Neither shows an operator how to calculate their own cost. This guide does that line by line, adds the step most calculations miss (empty miles), and turns the result into a per-mile fare floor you can check against your rate card.
Why cost per mile matters more than fare per mile
Your fare per mile only means something next to your cost per mile. A $2.80 fare looks healthy until you learn the cab costs $1.90 for every mile it drives and only half its miles carry a rider.
Knowing your cost per mile lets you:
- Set a fare floor and see which trips lose money
- Decide whether a long suburban run is worth the empty drive back
- Compare the cost of a newer, more efficient vehicle against the one you run now
- Check whether a contract or flat rate covers its real cost
Step 1: list your fixed costs
Fixed costs are the ones you pay whether the cab moves or not. Add them up for one vehicle for one year.
- Vehicle, What to include: Loan or lease payments, or yearly depreciation if you own it outright
- Insurance, What to include: Commercial auto policy for that vehicle
- Permits and licensing, What to include: Vehicle permit, medallion lease or fees, registration, inspections
- Equipment, What to include: Meter, camera, signage, payment terminal, spread over their life
- Overhead share, What to include: A share of office, phones, software, and dispatch costs
Step 2: list your variable costs
Variable costs rise with every mile. Express each one per mile.
- Fuel or charging, How to get it per mile: Price per gallon ÷ miles per gallon (or price per kWh × kWh per mile)
- Maintenance, How to get it per mile: Yearly maintenance spend ÷ yearly miles
- Tires, How to get it per mile: Cost of a set ÷ miles a set lasts
- Cleaning, How to get it per mile: Yearly cleaning spend ÷ yearly miles
Step 3: decide how to count driver pay
Driver pay is usually the biggest single cost, and how you count it depends on how drivers are paid.
- Hourly or salaried drivers: add yearly wages and payroll taxes to your costs, then spread them across miles.
- Commission drivers: treat the commission as a share of each fare rather than a cost per mile, and make sure the fare covers both the commission and your other costs.
- Lease drivers: the driver pays you a lease and keeps the fares, so your cost per mile is about the vehicle side only, and the lease price has to cover it.
Pick the model you actually use. Mixing them is how per-mile numbers end up wrong.
Step 4: account for empty miles
Empty miles are the drives to pickups, back from drop-offs, and between rides with nobody in the back. Riders only pay for loaded miles, so your cost has to be spread across those.
Cost per paid mile = cost per total mile ÷ share of miles that are paid
If 55% of your miles carry a rider, every paid mile has to carry the cost of almost two miles. This is the step that turns a fare that looks profitable into one that is not.
Worked example: one cab, one year
Every number below is an assumption chosen to show the method. Replace each with your own figures from your books.
Fixed costs (per year):
- Vehicle payment: $7,200
- Commercial insurance: $6,000
- Permits, registration, inspections: $1,500
- Meter, camera, and terminal (spread over life): $400
- Overhead share: $3,000
- Total fixed: $18,100
Usage:
- Total miles driven per year: 50,000
- Share of miles with a paying rider: 55%
- Paid miles per year: 27,500
Variable costs (per mile):
- Fuel: $3.50 per gallon ÷ 35 mpg = $0.10
- Maintenance: $4,000 ÷ 50,000 = $0.08
- Tires: $800 per set ÷ 40,000 miles = $0.02
- Cleaning: $1,000 ÷ 50,000 = $0.02
- Total variable: $0.22 per mile
Driver cost (hourly model):
- Wages and payroll taxes: $45,000 per year
- Per total mile: $45,000 ÷ 50,000 = $0.90
Cost per total mile:
- Fixed: $18,100 ÷ 50,000 = $0.36
- Variable: $0.22
- Driver: $0.90
- Total: $1.48 per mile driven
Cost per paid mile:
- $1.48 ÷ 0.55 = $2.69 per paid mile
Fare floor with margin:
- Target margin: 15% of the fare
- $2.69 ÷ 0.85 = $3.16 per paid mile
Under these assumptions, a published rate of $2.80 per mile with no base fare would lose money on every paid mile. In practice the base fare and waiting time rate cover part of the gap, which is why you test the whole rate card, not just the per-mile line.
How sensitive is the result?
The share of paid miles moves the answer more than fuel price does. Here is the same example with only the paid share changed.
- 45%, Cost per paid mile: $3.29; Fare floor at 15% margin: $3.87
- 55%, Cost per paid mile: $2.69; Fare floor at 15% margin: $3.16
- 65%, Cost per paid mile: $2.28; Fare floor at 15% margin: $2.68
- 75%, Cost per paid mile: $1.97; Fare floor at 15% margin: $2.32
Going from 55% to 65% paid miles cuts the fare floor by about 48 cents a mile. That is usually easier to win through better dispatch and more pre-booked work than through cheaper fuel.
Checklist: is your cost per mile complete?
Before you trust your number, make sure nothing is missing.
- [ ] Vehicle cost is included even if the cab is paid off (use depreciation).
- [ ] Insurance is the full yearly premium for that vehicle.
- [ ] Permit, medallion, or lease fees are included.
- [ ] Maintenance comes from real repair records, not a guess.
- [ ] Driver pay matches your actual pay model.
- [ ] Overhead, including software and phones, has a share per vehicle.
- [ ] Empty miles are counted, using odometer readings against paid trip miles.
- [ ] The number is updated when fuel, insurance, or pay changes.
Turning the number into fares
Once you know your cost per paid mile, build every fare from it: the per-mile rate, the base fare, minimums, and flat zone rates for common trips. Local rules may set or cap taxi fares, so check with your licensing authority before changing published rates. The same cost-first approach for premium vehicles is in how much to charge for a limo per hour, and the bigger picture of starting and running a cab company is in how to start a taxi business.
Raise your paid-mile share with Ride Sync
The fastest way to lower your cost per paid mile is to fill more of the miles you already drive. Pre-booked trips and better dispatch do that.
Ride Sync puts pre-booked work on one dispatch board so you can see where cabs will be and pair a drop-off with a nearby pickup. Live GPS shows where each vehicle is right now, and the scheduling assistant highlights on reservation and quote pages when a driver is already booked. Your fares become rate rules, so riders get an instant price from the booking widget on your website and can pay to confirm by card, Apple Pay, or Google Pay through your own Stripe account. More on running the board is in taxi dispatch software for small fleets.
Frequently asked questions
How do I calculate taxi cost per mile?
Add your yearly fixed costs, variable costs, driver pay, and overhead for one cab, divide by the total miles it drives in a year, then divide by the share of miles that carry a paying rider.
What are empty miles in a taxi business?
They are miles driven without a paying passenger, such as driving to a pickup or back from a drop-off. Your fares have to cover their cost too.
Should driver pay be included in cost per mile?
Yes if drivers are paid by the hour or salary. If drivers are paid by commission, treat it as a share of each fare. If drivers lease the cab, the lease has to cover your vehicle costs.
How often should I recalculate cost per mile?
At least once a year, and whenever fuel, insurance, or driver pay changes significantly.
Can Ride Sync calculate my cost per mile?
No. Ride Sync prices trips from the rate rules you set. Use the method above to find your cost, then enter fares built on it as rate rules.
Quick recap
Taxi cost per mile is your total yearly cost for a cab divided by the miles it drives. List fixed costs, variable costs, driver pay, and overhead, divide by total miles, then divide by your share of paid miles to find the cost per paid mile. Add margin to get a fare floor, check it against local fare rules, and raise your paid-mile share with more pre-booked work on one board in Ride Sync.
Start a free trial of Ride Sync (14 days, no card required).

